In the smart and modern era, almost all household chores are done by smart appliances, meaning machines. The outer body of appliances like mixers, juicers, hair dryers, electric kettles and washing machines is made of strong plastic or fiber. According to science, plastic is a bad conductor of electricity. That means current cannot pass through it. This is the exact reason why people touch these machines without fear with wet or dry hands. But many times it happens that as soon as these plastic things are touched, a strong shock is received. So let us know why this happens and how it can be avoided.

Accumulation of Water and Dirt
Plastic itself does not conduct current, but the water and dirt accumulated on it certainly provide a pathway for electricity. This problem is common in machines used in the kitchen or bathroom. While grinding something in the mixer or washing clothes in the washing machine, water or lather splashes and gets inside the joints of the plastic body. Minerals and salt are dissolved in this tap water, which makes it a good conductor of electricity.

Apart from this, the oil and steam flying while cooking in the kitchen form a sticky layer on the machine, which holds moisture. When you touch this layer, the current reaches your body not through the plastic, but through that moisture and dirt.

Internal Metal Parts and Frayed Wires
Even though the outer layer of the machine is made of plastic, its internal motor, switches and wires are made of metal. When the machine gets old or heats up due to continuous use, the rubber of the internal wires starts melting or cutting.
Due to the vibration caused while the machine is running, many times the loose internal wire directly touches those screws or metal shafts that are on the outside. The lower part of the mixer jar, the ring around the switch, or the screws are made of iron or steel. When current leaks from the inside, it comes into these metal parts.

Poor Quality Plastic
In order to save some money, people sometimes buy local and cheap appliances, in which safety standards are not taken care of. The plastic used in these is recycled and of very poor quality, in which fine particles of carbon or metal are often mixed. When the motor heats up, this cheap plastic loses its insulation power.

Poor Earthing at Home
This is one of the biggest reasons for getting an electric shock. Most heavy appliances are provided with a three-pin plug, in which the top thickest pin is for earthing. If the earthing of your house is defective or you have juggled and plugged the three-pin into a two-pin adapter, the leakage current inside the machine starts circulating in the machine's body instead of going into the ground. As soon as you stand barefoot on the floor and touch it, your body becomes the path for earthing and you get a shock.